Technical Characteristics - Lagrange Crepes Creativ 139 006 Instruction Book

This unit is not intended to be used by people, including children of at
■ ■
least 8 years of age, whose physical, sensorial or mental capacities
are diminished, or who do not have the necessary knowledge or
experience, unless they have been trained and are supervised for
the use of this unit in full safety and understand the risks involved.
Do not let children play with the unit. Only children over the age of
8 can, with adult supervision, clean and maintain the unit.
These units are not intended to be operated by means of an exterior
■ ■
timer or by a separated remote control system.
Watch children to make sure that they don't play the unit.
■ ■
Keep the unit and the power cord out of reach of children under
■ ■
eight years old.

TECHNICAL CHARACTERISTICS

Common characteristics:
Fixed aluminum plate with anti-stick surfacing
Safety thermostat and control light
Polypropylene base
Detachable cord
Polyamide ladle for mini crêpes
Polyamide spatula
Power: 2000W - 230V - 50Hz
Model Crêpes Creativ' REF 139.006:
®
Silicone stencil for mini-crêpes
Large silicone crêpe stencil
Polyamide spreader
Model Crêpes Creativ'
Silicone stencil for mini-crêpes
Large silicone crêpe stencil
Mini crêpe silicone stencil - "hearts and stars" motifs
Polyamide spreader
Accessory stencil:
Mini crêpe stencil - "hearts and stars" motifs (REF 130 009)
CORD
Examine the power cord carefully before using it. If it is damaged,
don't use the unit.
The cord should only be replaced by the manufacturer, its after-sale
service or a person who is qualified and approved by the manufacturer
in order to avoid all danger for the user.
The cord used is a H05RRF 3G 0.75 mm
This unit is in compliance with directives 2006/95/CE, 2004/108/CE,
DEEE 2002/96/CE, RoHs 2002/95/CE and CE food contact regulation
1935/2004.
ENVIRONMENT
Protection of the environment – DIRECTIVE 2002/96/CE DEEE
In order to protect our environment and our health, the elimination
of electrical equipment at the end of its working life must be done
according to very specific rules and requires the involvement of all
parties, suppliers and users.
43
REF 139.009:
®
.
2