Installation - Procedures; Pressure Connections (Absolute); Electrical Connections; Completing The Installation - GE BAKER HUGHES DPS 5000 Series Instruction Manual

Can bus pressure transducer

Hide thumbs Also See for BAKER HUGHES DPS 5000 Series:

Table of Contents

Chapter 2. Installation

2.3 Installation – Procedures

WARNING

and a system that uses fuel or gas. This can cause an explosion that can

cause death or injury, and/or damage to equipment.

High pressures and temperatures are dangerous (refer to sales data

sheet or customer specified drawing). De-pressurize and allow to cool

components in a system that has high operating pressures and

temperatures.

Note: Until installation, keep the unit in the original container with all the covers in

position. The container and covers prevent contamination and damage. When not in use,

keep the connections clean at all times, and put the covers on the open connections.

Connect the pressure transducer connection to the pressure system and torque tighten the

connection (refer to System Installation Manual).

Refer to the sales data sheet or customer specified drawing.

Do all the applicable tests and checks (refer to System Installation Manual).

After completing installation, the pressure transducer is ready for use.

4 | DPS 5000 Series Instruction Manual-English

Do not interchange transducers between an oil system

Table of Contents