Meaning Of The Symbols - MTD CSH40 Original Operating Instructions

Contents
Contents
Meaning of the symbols...................................... 23
For your safety.................................................... 24
Safety information............................................... 25
Intended use ....................................................... 30
Identification plate............................................... 30
Operating elements ............................................ 30
Putting into use ................................................... 30
Assembly ............................................................ 31
Operation ............................................................ 32
Servicing ............................................................. 35
Transport and storage ........................................ 36
Troubleshooting .................................................. 36
Warranty ............................................................. 37
CE Declaration of Conformity ............................. 37
Environmentally-friendly disposal ....................... 37

Meaning of the symbols

Warning!
Read the instruction manual before
using for the first time!
Wear ear defenders and safety
goggles!
Wear a safety helmet, safety gog-
gles and ear defenders!
When working with the tool wear
non-slip shoes.
Wear safety gloves!
Do not leave the device in the rain!
Risk of kickback!
Always hold the device with both
hands.
Personal protective equipment / appropriate
clothing
When cutting with the device, always wear the fol-
lowing protective equipment:
- Head protection: Protective helmet with
facial protection
- Hearing protection: Ear plugs / ear defenders
according to DIN EN 352-1
- Eye protection: All-round tightly fitting protec-
tive goggles/protective shield on the helmet
Foot protection: Safety shoes with non-slip
soles, steel toe-caps and leg protection
Hand guard: Leather work gloves
Clothing: Safety overalls (cut-resistant)
Safety jacket (cut-resistant)
EN
23