Battery Not Discharging - Sungrow SH5K+ Check Points

Battery not discharging

1. Check the SOC of the battery. It is correct that the battery does not discharge if the
SOC is 0%.
2. Check whether the PV power is sufficient. The battery will not discharge under
normal charge management mode if the PV power is more than the load power. It
will not start discharging if the import power is less than 150 W.
3. Check the Reserved Capacity of battery (called 'Backup SOC' in the earlier firmware
version). The battery will not discharge when the Reserved Capacity (backup SOC)
is reached when the grid is on. The default value should be 0%.
4. Check the 'Forced charge' setting. The battery will not discharge in the time period of
the 'Forced Charge' is applied.
SH5K+_TD_Battery not charging or discharging check points_201803
Sungrow Australia Group Pty. Ltd. | 1800 SUNGROW (786 476)
service@sungrowpower.com.au | www.sungrowpower.com.au
Page 2 of 3