Setting the CAM : Setting the System
Setting the Demo Function
Demo function will allow you to view all the functions that the CAM supports. Demo will run for up to 5 minutes.
1. Move [Mode Selector] down to turn on the CAM and move it down again.
◆
The Mode Selection screen appears.
2. Move the [ ▲ /▼ ] switch to select
3. Move the [ ▲ /▼ ] switch to select <System> and press the [OK] button.
4. Move the [ ▲ /▼ ] switch to select <Demo> and press the [OK] button.
5. Move the [ ▲ /▼ ] switch to select the desired setting and
press the [OK] button.
◆
Off: Cancel the Demo function.
◆
5 Minutes: Start the Demo function in 5 minutes.
◆
Play Now: Start the Demo function now.
6. Press the [Back] button to finish setting.
Note
✤
If you select <Back> in the menu, the previous menu appears.
✤
If you set the Demo function, it operates only in Video Record mode.
System Settings
and press the [OK] button.
ENGLISH
Mode Selection
2
MP3
Voice Recorder
File Browser
System Settings
Back
System Settings
3
Display
Date/Time
System
Memory
Back
4
Settings: System
5 Minutes
Auto Shut off
Demo
Off
Start-up
Video Mode
File No.
Reset
Beep Sound
On
Settings: System
5
Auto Shut off
5 Minutes
Demo
5 Minutes
Video Mode
Start-up
File No.
Reset
On
Beep Sound
95
95