Video Mode : Recording
Setting the Video In
Video In function works only in Video mode.
Video In setting enables you to record signal from external sources or External Camera Module and display it on LCD monitor.
Also, you can direct your video or image to external devices to record or play back.
1. Move [Mode Selector] down to turn on the CAM.
◆
The Video Record screen appears.
2. Press the [Menu] button and move the [ ▲ /▼ ] switch.
Press the [OK] button after selecting <Video In>.
3. "Choose the type of line-in source" message appears.
Move the [ ▲ /▼ ] switch to select <External Camera> when using the
external camera or <Normal> when using just the camcorder, then press
the [OK] button.
If <External Camera> is selected, "External" appears on the screen and enables
you to record signal from External Camera Module.
If <Normal> is selected, "Normal" appears on the screen and enables you to record
signal from external sources.
◆
It is recommended that only digital devices (DVD, DVC, etc.) are used as external
sources.
Note
✤
When the External Camera Module is connected, [Record/Stop] button of the main set does
not operate.
ENGLISH
2
Video Record
SF / 720
Record
Video In
Play
Settings
Back
00:16 / 10:41
STBY
Video Record
3
SF / 720
Record
Choose the type of
Video In
line-in source.
Play
Settings
External Camera
Back
Normal
STBY
00:16 / 10:41
3
External
SF / 704
STBY
00:16 / 10:41
39
39