SKY-WATCHER Star Adventurer 2i Instruction Manual page 7

Sky-Watcher
Camera interface
Cable model
Canon remote
AP-R1C
control terminal (E3
(CANON C1)
type)
Canon remote
AP-R3C
control terminal (N3
(CANON C3)
type)
AP-R1N Nikon Ten-pin
(NIKON N1) remote terminal
AP-R2N Nikon Remote cord
(NIKON N2) connector
AP-R3N Nikon Accessory
(NIKON N3) terminal
Sony REMOTE
AP-R1S
terminal
(SONY S1)
AP-R3L Olympus
(OLYMPUS Multi-connector
OP12)
DSLR Shutter Control Cable - To connect the DSLR Shutter
Control Port of Star Adventurer 2i to your DSLR's external
shutter control port. This allows Star Adventurer 2i to directly
control the DSLR's shutter release with preprogrammed shutter
interval. You can order an optional cable for your camera from
your local resellers. The Following list shows the cables that we
offer as optional items.
Compatible Remote
controller interface
Canon
RS-60E3
Canon
RS-80N3, TC-80N3
Nikon MC-22, MC-30, MC-
36
Nikon MC-DC1
Nikon MC-DC2
Sony RM-S1AM, RM-L1AM
RM-UC1
Compatible Camera
Canon EOS 100D, 300D/350D, 400D/450D,
500D/550D, 600D/650D, 700D, 60D/60Da, 70D
Canon EOS 5D/6D/7D, 10D/20D/30D/40D/50D,
1V, 1D, 1Ds Mark III, 5D Mark III
Nikon D1/D2/D3/D4 D200/D300/D700/D800
Nikon D90, D600, D3000/D3100/D3200/D3300,
D5000/D5100/D5200/D5300, D7000/D7100
Sony a100, a200, a300, a350, a450, a550,
a560, a700, a850, a900
Olympus E-P1/E-P2, E-PL2/E-PL3, E510/E520/
E550/E620, E400/ E410/E420,
SP-570UZ/SP-590UZ
7
Nikon D70S, D80