Axis T85 PoE+ Series Installation Manual page 13

Mount the product in a rack - AXIS T8524
Below section describes how to mount AXIS T8524 in a rack.
1. Attach the mounting brackets to both sides of the chassi. Insert screws (4x) and tighten
them with a screwdriver to secure the brackets.
2. Place the product on a rack shelf in the rack. Push it in until the oval holes in the
brackets align with the mounting holes in the rack posts.
3. Attach the brackets to the posts. Insert screws (2x) and tighten them.
Place the product on a desk or shelf
NO NO TICE NO TICE TICE
Below warning is applicable for AXIS T8508
The switch is not equipped with a fan for cooling, do not cover the switch or block the
airflow.
1. Verify that the workbench is sturdy and reliably grounded.
2. Attach the four adhesive rubber feet to the bottom of the product, one in each corner.
Mount the product on a wall - AXIS T8508
Below section describes how to mount AXIS T8508 on a wall.
NO NO NO TICE TICE TICE
The switch is not equipped with a fan for cooling, do not cover the switch or block the
airflow.
AXIS T85 PoE+ Network Switch Series
13
EN