Table of Contents
Advertisement
Maintenance
Brass burner head
CAUTION
• The start er electrodes are not removable. Do not attempt to remove them by
force.
• To avoid chipping, do no t bang grates and caps against each other or against
hard surfaces, such as cast iron cookware.
• The burner spreader can be blocked by food or dust. Clean the spreader i f it
appears blocked. If you clean the spreader with water, assemble it only after it is
completely dry. If the spreader is wet, it might prevent the burners f rom igniting.
• To avoid falling down the grates, make sure to remove both sides grates first.
48 English
NY63T8751SS_AA_DG68-01218A-00_EN+MES+CFR.indb 48
NOTE
• The brass parts of your burner will change
color with use. However, this will not
affect performance and you can clean the
brass parts with a brass cleaner.
• After cleaning, confirm that the burner
port openings aren't plugged.
• Do not wash any burner components in a
dish washer.
Burner reinstall guide
Dual burner head
1. Orient the burner head so that the
2. Install the burner head so that the
Round burner head
1. Orient the burner head so that the
2. Install the burner head so that the
opening for the elec trode lines up with
the electrode.
electr ode passes through the opening for
the electrode. Make sure the burner head
lies flat on the stove top.
opening for the elec trode lines up with
the electrode.
electr ode passes through the opening for
the electrode. Make sure the burner head
lies flat on the stove top.
2020-03-23 6:45:59
Advertisement
Table of Contents
