Smart Control - Samsung NY63 875 Series User Manual

Smart control

How to connect the oven
1. Download and open the SmartThings app on your smart de vice.
2. Follow the app's on-screen instructions to connect your range.
3. Once the process is complete, the connected
displays and the app will confirm you are connected.
4. If the connection icon does not turn on, follow the instruction on the app to
reconnect.
To control the oven remotely
1. Tap . appears in the display. The oven can now be controlled remotely with
a connected device.
2. Select the oven icon on the SmartThings app to open the Oven Control app.
When the app is connected to the oven, you can perform the following functions
through the application:
Oven remote control using the SmartThings app
Oven/ Cooktop Monitoring
Oven Remote Control
My Cooking
NY63T8751SS_AA_DG68-01218A-00_EN+MES+CFR.indb 43
icon located on your range
• Check the status of the oven.
• Monitor the on/ of f status of each cooktop
burner.
• Set or adjust oven settings remotely.
• Turn the oven off remotely.
• Once cooking starts, change the set cooking
time and temperature remotely.
Oven remote control using the SmartThings app
Error Check
Temp Probe
• If
is not shown in the display, you are still able to monitor the oven and
cooktop status and turn the oven off.
WI-FI On/Off
If you turn WI-FI mode Off, mobile devices cannot connect to the range.
1 1. Tap and hold for 3 seconds.
2. Select Wi-Fi using the dial knob.
3. Turn the dial knob to select On/Off and push to save the changes.
NOTE
• Opening the oven door or tapping
most of the remote functions f rom operating.
• When oven cooking is finished or cancelled,
• For safety reasons, you cannot turn on the electric oven remotely.
• For safety reasons, you must speci fy the cooking time to enable remote control.
• The oven continues operating even i f the Wi-Fi connection is lost.
• Smart Control will not work properly i f the Wi-Fi Connection is unstable.
• See the SmartThings app manual for det ailed information.
• Automatically recognize errors.
• Monitor the current t emperature and reset the
probe setting.
will delete f rom the display and prevent
is removed f rom the display.
English 43
2020-03-23 6:45:59