Samsung NY63 875 Series User Manual page 56

Dual fuel slide-in range
Hide thumbs Also See for NY63 875 Series:
Table of Contents

Advertisement

Troubleshooting
Problem
Very large or
The wrong burner orifice is
yellow surface
installed.
burner flames.
Surface burners
The oven door lock is
light but oven
turned on.
burners do not
light.
The Gas Pressure
Regulator shut off switch
is in the off position.
Oven
Problem
The oven control
There may be an issue
beeps and displays
with your oven. See the
"Information codes" chart
an information
code.
on page 60.
56 English
NY63T8751SS_AA_DG68-01218A-00_EN+MES+CFR.indb 56
Cause
Action
Check the burner orifice size.
Contact your installer i f you
have the wrong orifice (LP
gas instead of natural gas or
natural gas instead of LP gas).
The display will show the Lock
icon. Hold the oven door open
and tap and hold START for
3 seconds. The oven will beep
and the Lock icon will turn off.
Call a qualified service
technician.
Cause
Action
Tap OFF, and then restart the
oven.
If the problem persists,
disconnect all power to the
range for at least 30 seconds
and then reconnect the power.
If this does not solve the
problem, call for service.
Problem
Cause
The oven will not
The oven is not
turn on.
completely plugged into
the electrical outlet.
A fuse in your home
may be blown or the
circuit breaker may have
tripped.
The oven
The oven thermostat
temperature is too
needs adjustment.
hot or cold.
The oven heater
The oven door lock is
will not shut off.
turned on.
The Sabbath function has
been acti vated.
Action
Make sure the electrical plug
is fully inserted into a live,
properly grounded outlet.
Replace the fuse or reset the
circuit breaker.
See page 42.
The display will show the Lock
icon. Hold the oven door open
and tap and hold START for
3 seconds. The oven will beep
and the Lock icon will turn off.
SAb and the time of day will
show in the display. All other
controls and signals will be
deacti vated. To turn off the
oven only, tap OFF.
To cancel the Sabbath function
and reacti vate the controls and
signals, tap and hold
for
3 seconds.
2020-03-23 6:45:59

Advertisement

Table of Contents
loading

Table of Contents