Samsung NY63 875 Series User Manual page 42

Electric oven
Language
Select a preferred language f rom English, French. You can not change the language
during cooking.
1. Tap and hold for 3 seconds.
2. Select Language using the dial knob.
3. Turn the dial knob to select Language and push to save the changes.
Temp. Unit (°F or °C)
Change the temperature format of the oven to Fahrenheit or Centigrade. The
default is Fahrenheit.
1. Tap and hold for 3 seconds.
2. Select Temperature unit using the dial knob.
3. Turn the dial knob to select unit and push to save the changes.
Calibrate Temperature
The oven temperature has been calibrated at the factor y. When first using the
oven, follow the recommended recipe times and temperatures. If it appears that
the oven is too hot or too cool, you can recalibrate the oven temperature. Before
recalibrating, test a recipe by using a temperature setting that is higher or lower
than recommended. The baking results should help you decide how much of an
adjustment is needed. The oven temperature can be adjusted by ±35 °F (±19 °C).
1. Tap and hold for 3 seconds.
2. Select Calibrate Temp using the dial knob.
3. Turn the dial knob to adjust temperature value.
4. Push the dial knob to save the change s.
NOTE
This adjustment does not affect the broiling or the self-cleaning temperature, and
is retained in memory after a power failure.
My Pattern
This function remembers and stores the cook settings f requently used by the user.
1. Tap and hold for 3 seconds.
2. Select My Pattern using the dial knob.
3. Turn the dial knob to select On/Off and push to save the changes.
42 English
NY63T8751SS_AA_DG68-01218A-00_EN+MES+CFR.indb 42
Default Cavity
One cavity will be selected as a default in twin mode when oven turns on.
1. Tap and hold for 3 seconds.
2. Select Default Cavity using the dial knob.
3. Turn the dial knob to select Upper or Lower and push to save the changes.
Welcome Lighting
Lighting pattern will be shown on cooktop knobs when the oven display wakes up.
1. Tap and hold for 3 sec.
2. Select Welcome Lighting using the dial knob.
3. Turn the dial knob to select On/Off and push to save the change.
Demo mode
This is used by retailers for display purposes only. In this mode, the heating
element does not operate.
1. Tap and hold for 3 seconds.
2. Select Demo mode using the dial knob.
3. Turn the dial knob to select On/Off and push to save the changes.
Reset
Reset your oven th its factor y default settings. This will erase all data and can't be
recovered.
1. Tap and hold for 3 seconds.
2. Select Reset using the dial knob.
3. Turn the dial knob to select Cancel /Reset.
2020-03-23 6:45:59