Samsung SCX-5315F User Manual page 15

1.10
G S
ETTING TARTED
Option
USB mode selections are FAST and SLOW.
FAST is the default mode. Some PC users
may experience poor USB implementation
USB MODE
in the default mode. If this occurs, select
the SLOW mode in order to achieve
successful results.
With this option enabled, you can print 2-
sided fax pages. You can select LONG EDGE
FAX
or SHORT EDGE according to the desired
DUPLEX
binding orientation. Setting OFF turns the
feature off.
You can improve the print quality to 1200
dpi for copying. The TEXT setting refines the
print quality of characters by smoothing out
jagged edges that can occur on the angles
and curves of the characters. The IMAGE
setting refines the print quality of photo
IMAGE
image by smoothing the shades of grey. The
QUALITY
NORMAL setting will print the received faxes
with normal quality (600 dpi).
N
OTE
documents with photographs or the IMAGE
setting for text documents, you may not get
the desired print quality.
The scan lamp under the document glass
automatically turns off when it is not in
actual use to reduce power consumption
and extend the lamp life. The lamp will
automatically wake up after some warm-up
SCAN
time when you start to scan.
SLEEP
This option allows you to determine the
MODE
length of time the scan lamp waits after a
scan job is completed before it switches to
sleep mode. Select from 4HOURS, 8HOURS
and 12 HOURS. Setting OFF leaves the lamp
on all the time.
You can use your machine as a network
printer by installing an optional network
interface card. This menu allows you to
Network
configure the network parameters.
Setup
For further details, see the MFP user's guide
that came with your machine.
Description
: If you use the TEXT setting for