Samsung CLX-6220FX User Manual page 122

Condition
Toner smear If toner smears on the page:
• Clean the inside of the machine (See
"Cleaning the inside" on page 2).
• Check the paper type and quality (See "Print
media specifications" on page 3).
• Remove the toner cartridge and then, install
a new one (See "Replacing the toner
cartridge" on page 2).
Vertical repetitive If marks repeatedly appear on the printed side of
defects the page at even intervals:
• The toner cartridge may be damaged. If you
still have the same problem, remove the
toner cartridge and, install a new one (See
"Replacing the toner cartridge" on page 2).
• Parts of the machine may have toner on
them. If the defects occur on the back of the
page, the problem will likely correct itself
after a few more pages.
• The fusing assembly may be damaged.
Contact a service representative.
Background Background scatter results from bits of toner
scatter randomly distributed on the printed page.
• The paper may be too damp. Try printing
with a fresh ream of paper. Do not open
A reams of paper until necessary so that the
paper does not absorb too much moisture.
• If background scatter occurs on an envelope,
change the printing layout to avoid printing
over areas that have overlapping seams on
the reverse side. Printing on seams can
cause problems.
• If background scatter covers the entire
surface area of a printed page, adjust the
print resolution through your software
application or in Printing Preferences (See
"Opening printing preferences" on page 2).
Misformed • If characters are improperly formed and
characters producing hollow images, the paper stock
may be too slick. Try different paper (See
"Print media specifications" on page 3).
• If characters are improperly formed and
producing a wavy effect, the scanner unit may
need service (See "Cleaning the scan unit" on
page 3).
Suggested Solutions
Troubleshooting_ 17
Condition
Page skew • Ensure that the paper is loaded properly.
• Check the paper type and quality (See "Print
media specifications" on page 3).
• Ensure that the guides are not too tight or too
loose against the paper stack.
Curl or wave • Ensure that the paper is loaded properly.
• Check the paper type and quality. Both high
temperature and humidity can cause paper
curl (See "Print media specifications" on
page 3).
• Turn the stack of paper over in the tray. Also
try rotating the paper 180° in the tray.
Wrinkles or • Ensure that the paper is loaded properly.
creases
• Check the paper type and quality (See "Print
media specifications" on page 3).
• Turn the stack of paper over in the tray. Also
try rotating the paper 180° in the tray.
Back of printouts Check for leaking toner. Clean the inside of the
are dirty machine (See "Cleaning the inside" on page 2).
Solid Color or • The toner cartridge may not be installed
Black pages properly. Remove the cartridge and reinsert it.
• The toner cartridge may be defective.
Remove the toner cartridge and install a new
one (See "Replacing the toner cartridge" on
A
page 2).
• The machine may require repair. Contact a
service representative.
Suggested Solutions