Samsung CLX-6220FX User Manual page 115

Message Meaning
Paper Empty in There is no paper in the
[yyy] tray.
Paper is empty
in [yyy].
Load paper
Jam bottom of Paper has jammed
duplex during duplex printing.
Jam in exit area Paper has jammed in exit
area.
Jam inside machine Paper has jammed
inside the machine.
Jam inside of Paper has jammed
duplex during duplex printing.
Jam top of duplex Paper has jammed
during duplex printing.
Junk Fax Error The machine has
received a fax from
Junk Fax Job
which is registered as a
Cancelled
junk fax.
Line Busy The receiving fax
machine did not answer
The line is already
or the line is already
engaged.
engaged.
Try Again Later
Line Error Your machine cannot
connect with the
The Fax Line has a
receiving fax machine or
problem.
has lost contact because
Try Again Later
of a problem with the
phone line.
LSU error There is a problem in the
machine.
Error: [aaa]
Turn off then on
Memory Full The memory is full.
Cancel | Start
Memory Full The memory is full.
Divide the job
Memory Full The memory is full.
Fax memory is full.
Print or remove
received fax job
Motor Error There is a problem in the
machine.
Error: [aaa]
Turn off then on
Suggested solutions
Load paper in the tray
(See "Loading paper in
the tray" on page 3).
Clear the jam (See "In
the duplex unit area" on
page 7).
Clear the jam (See "In
exit area" on page 5).
Clear the jam (See
"Inside the machine" on
page 4).
Clear the jam (See "In
the duplex unit area" on
page 7).
Clear the jam (See "In
the duplex unit area" on
page 7).
The received fax data
will be deleted.
Reconfirm junk fax
setup (See "Receiving"
on page 1).
Try again after a few
minutes.
Try again. If the problem
persists, wait an hour or
so for the line to clear
again. Or, turn the ECM
mode on (See
"Sending" on page 1.)
Turn the machine off
and turn it on again. If
the problem persists,
call for service.
Press the left/right
arrow to highlight
Cancel or Start, then
press OK. If you select
Cancel , the machine
stops the fax job. If you
select Start, the
machine only sends
scanned documents of
the fax job.
Split the transmission
into more than one
operation.
Print or remove the
received fax data in the
memory.
Turn the machine off
and turn it on again. If
the problem persists,
call for service.
Troubleshooting_ 10
Message Meaning
Network Error There is a problem with
the network.
There is a problem
with the network.
No Answer The remote fax machine
has not answered after
The remote fax
several redial attempts.
machine has not
answered
Not proper room The machine is in a room
temperature. with improper room
Change room temperature.
temperature
No Such Job You are performing an
Add Pages or Cancel
Job operation, but there
are no jobs waiting.
Network problem The machine is not
connected with a
Network cable is
network cable.
not connected.
Check it.
Network problem There is a problem on
the network interface.
Network card is
not installed.
Check it.
Original paper Jam The load original has
jammed in the document
Original paper Jam
feeder.
inside of scanner.
Remove Jam
Original paper Jam The original is too long
for scanner.
Original paper is too
long for scanner.
Check size
Output Bin Full The document output
tray is full.
Output Bin Full
Remove printed
paper
Paper Jam in MP Paper has jammed in the
multi-purpose tray area.
Paper Jam in tray1 Paper has jammed in the
tray1 area.
Paper Jam in tray2 Paper has jammed in the
tray2 area.
Suggested solutions
Check the network. If
the problem persists,
ask the system
administrator or the
person who has set up
your local network.
Try again. Verify the
number to ensure that a
fax can be received.
Move the machine to a
room with proper room
temperature (See
"Environmental
specifications" on
page 1).
Check the display to
see if there are any
scheduled jobs. The
display should indicate
if any scheduled jobs
are in Standby mode,
for example, Delay Fax.
Connect the machine to
the network with a
network cable.
Turn the power switch
off and on. If the
problem persists, call
for service.
Clear the jam (See
"Clearing original
document jams" on
page 2).
Check the originals
(See "Preparing
originals" on page 1).
The document output
tray can hold up to 160
sheets of plain paper.
Once the paper is
removed from the
document output tray,
the printer resumes
printing.
Clear the jam (See "In
the multi-purpose tray"
on page 4).
Clear the jam (See "In
tray 1" on page 3).
Clear the jam (See "In
optional tray 2" on
page 3).