Available Accessories; Replacing Toner Cartridge; Maintenance Parts - Samsung CLX-6220FX User Manual

Available accessories

You can purchase and install accessories to enhance your machine's
performance and capacity.
Accessory function
Memory module Extend your machine's
memory capacity.
Optional tray 2 If you are experiencing
frequent paper supply
problems, you can
attach an additional 500
sheets tray. You can
print documents in
various sizes and types
of print materials.
Hard disk Allows you to enhance
(CLX-6250 Series the machine's capability
only) and print in various
ways.
IEEE 802.11 b/g Allows you to connect
Wireless LAN your printer to a
(CLX-6250 Series wireless network.
a
only)
a. Depending on your country, wireless LAN cards may not be available.
Contact your local Samsung dealer or the retailer where you bought your
printer.

Maintenance parts

To purchase maintenance parts, contact the source where you bought the
machine.
Replacing maintenance parts can be performed only by an authorized
service provider, dealer, or the retailer where you bought the machine. The
warranty does not cover the replacement of any maintenance parts once it
has reached its "Average Yield".
Maintenance parts are replaced at specific intervals to avoid print quality
and paper feed problems resulting from worn parts, see table below. The
purpose of which is to maintain your machine in top working condition. The
maintenance parts below should be replaced when the life span of each
item has been met.
parts
Fuser unit
Document feeder friction pad
Document feeder pick-up roller
Pick-up roller (Multi-purpose tray, Tray1,
Optional tray 2)
Friction pad (Multi-purpose tray, Tray1,
Optional tray 2)
Part name
• CLX-6220 Series
-CLP-MEM201: 128 MB
-CLP-MEM202: 256 MB
• CLX-6250 Series
-ML-MEM150: 128 MB
-ML-MEM160: 256 MB
-ML-MEM170: 512 MB
CLX-S6250A
ML-HDK300
ML-NWA40L
a
Average yield
Approx. 100,000 pages
Approx. 75,000 pages
Approx. 20,000 pages
Approx. 70,000 pages
Approx. 70,000 pages
Supplies and accessories_ 2
a. It will be affected by operating system used, computing performance,
application software, connecting method, media type, media size and
job complexity.
Replacing the toner cartridge
Click this link to open an animation about replacing a toner cartridge.
When the toner cartridge reaches its estimated cartridge life.
• The status LED and the toner-related message on the display indicates
which each individual toner cartridge should be replaced.
• The machine stops printing. Incoming faxes are saved in memory.
At this stage, the toner cartridge needs to be replaced. Check the type of the
toner cartridge for your machine (See "Available supplies" on page 1).
1. Using the handle, completely open the front door.
2. Grasp the handles on the toner cartridge and pull to remove the
cartridge from the machine.
If you open the front door, be careful not to touch the underneath
the control panel (the lower part of the fuser unit). The temperature
of the fuser unit might be extremely hot and could damage your