Advertisement
Controls and Switches II
We suggest you start exploring the channels with all controls set to 12:00
o'clock and the master volume slightly cracked open.
CONTROLS ON THE BACK
Effects Loop -10 dB
This feature allows you to set the basic level of the
connected effects device. This can be very useful if
you are using an effects unit with a built-in intermedi-
ate amplifi er.
DIRECT OUT
Pre/Post
This switch controls wether the signal of the XLR direct
output is sent out before or behind the power amp.
The signal that is sent out behind the power amp will
sound stronger, but will overdrive earlier depending
on the connected device.
Ground Lift
If you notice a slight hum inside the signal while play-
ing, the electrical environment could have an earth-
ing problem. This feature allows you to disconnect
one of the XLR pins. This will solve the problem and
you will no longer hear any hum.
8
Advertisement
