Page 2
Congratulations! We would like to thank you for purchasing the SL30B Electric Bass Amplifi er. It has been specially designed and developed for the use with electric basses. Before using your new amplifi er, we advise to read the following pages carefully.
Setting up the SL30B WARNING! To avoid electrical shock or any other damage, make sure that the SL30B and all other devices are switched off before you start connecting them to the amplifi er! Power Connections/Mains Main Fuse Before connecting to a grounded power outlet,...
fi nd on the very left side of the panel. They are titled with “Passive” and “Active”, and were This jack is used to connect the SL30B to a grounded installed to transmit the signal of your bass perfectly power outlet.
This can be useful if you want to adjust the amplifi er’s sound to a specifi c playing style. You can always work with one basic sound, as the SL30B is a single channel amplifi er.
Volume Contour This knob controls the master volume of the SL30B. This knob allows you to adjust the middle frequencies At the same time, the preamp level will increase too in a very fi ne range. By turning the knob clockwise, which can lead to unrequested distortion.
While the last three effect groups can be inserted in the fx sound. loop of the SL30B, level-related units must always be con- nected between instrument and amplifi er. A lot of our customers gave us a positive feedback on...
Specifi cations 30 Watts Power Output: Speakers: 1 x 10“ Special Design Power Switches: Bass, Middle, Treble, Contour Equalization: none Effects: Input (Active, Passive) Connection Jacks: Headphones FX Send & Return Mains Dimensions: 51 x 26 x 47 cm L/B/T 16 kg Weight: Accessories:...