Page 1
ELECTRIC GUITAR AMP Owner‘s Manual ML-30R...
Page 2
Congratulations! We would like to thank you for purchasing the ML-30R Electric Guitar Amplifi er. It has been specially designed and developed for the use with electric guitars. Before using your new amplifi er, we advise to read the following pages carefully.
Setting up the ML-30R WARNING! To avoid electrical shock or any other damage, make sure that the ML-30R and all other devices are switched off before you start connecting them to the amplifi er! Power Connections/Mains Main Fuse Before connecting to a grounded power outlet,...
You should be careful when using this effect, because it can also CONNECTIONS ON THE BACK change the sound to something intransparent. Mains This jack is used to connect the ML-30R to a grounded power outlet.
Overdrive This switches between Clean and Overdrive mode of the ML-30R. If pushed in, the amplifi er works in the Mains distorted mode. You will receive a clean sound when inactive.
Rotary or Vibe Analogue units will not harm the signal’s quality, but they Due to the fact that the ML-30R does not feature an fx are also limited and normally produce only one overall loop, you will have to connect external effects devices sound.
Need help?
Do you have a question about the ML-30R and is the answer not in the manual?
Questions and answers