South Africa Regulatory Compliance - Ublox NORA-B1 Series System Integration Manual

NORA-B1 series - System integration manual

6.8 South Africa regulatory compliance

NORA-B1 modules are compliant and certified by the Independent Communications Authority of
South Africa (ICASA). End-products that are made available for sale or lease or is supplied in any other
manner in South Africa shall have a legible label permanently affixed to its exterior surface. The label
shall have the ICASA logo and the ICASA issued license number as shown in the figure below. The
minimum width and height of the ICASA logo shall be 3 mm. The approval labels must be purchased
by the customer's local representative directly from the approval authority ICASA. A sample of a
NORA-B1 ICASA label is included below:
TA-2019/1202
APPROVED
More information on registration as a Responsible Integrator and labeling requirements will be found
at the following website:
Independent Communications Authority of South Africa (ICASA) web site - https://www.icasa.org.za
UBX-20027617 - R02 Regulatory information and requirements Page 46 of 58
C1-Public