Installation - Envirovent energiSava 250 Installation Manual

Installation

1. Hold the unit up to the chosen location and check there is space
for ducts, condensate drainage, filter and keypad access.
2. Once you are satisfied with the position, line up the two brackets
using the printed template then secure them to the mounting surface..
Use 10 8gx2.0" screws and 10 plasterboard plugs.
3. Mount the unit onto the brackets ensuring that it is fully supported.
4. Apply the two wing nuts onto the threaded studs then insert the
self-tapping screw into the hole and tighten it. This will ensure the
unit cannot be accidentally knocked off the brackets.
1
3
8
energiSava 250
®
2
4
SHOULD YOU ENCOUNTER ANY PROBLEMS
INSTALLING THIS UNIT, CALL US ON:
01423 859 395