Box Contents; Pre-Installation Checklist - Envirovent energiSava 250 Installation Manual

Box Contents

EnergiSava 250
®
• 1x energiSava
®
unit
• 1x Remote control
• 1x Instruction guide
• 1x User guide
• 2x Mounting brackets
• 10x Screws 8g x 2.0"
• 10x Plasterboard
plugs
• 2x Wing nuts
• 1x Screw 10g x 0.5"
• 1 x Condensate
drainage kit
Pre - Installation Checklist
• Does the unit fit in the space where it will be installed?
• Is there room to connect ducts to the spigots without tight duct bends?
• Is there room to access and replace the filters after installation?
• Are there any obstructions above or below the locations where the
input and extract valves are to be fitted?
• Is the mounted surface strong enough to support the unit?
• Is the mounting surface level?
• Are there adequate facilities to connect the unit condensate drain to
the internal waste system of the property?
AFTER INSTALLATION THE END USER SHOULD
KEEP THIS GUIDE FOR FUTURE REFERENCE
EnergiSava
250 • 1x energiSava
app unit
• 1x Instruction guide
• 1x User guide
• 1x App guide
• 2x Mounting brackets
• 10x Screws 8g x 2.0"
• 10x Plasterboard
plugs
• 2x Wing nuts
• 1x Screw 10g x 0.5"
• 1 x Condensate
drainage kit
THROW AWAY
250 App
®
250
®
DO NOT
EnergiSava 250 RS
®
& Basic
1x energiSava 250
®
unit
1x Wired Remote
Switch (RS only)
1x Instruction guide
1x User guide
2x Mounting brackets
10x Screws 8g x 2.0"
10x Plasterboard plugs
2x Wing nuts
1x Screw 10g x 0.5"
1x Condensate
drainage kit
7