Advertisement
1. OFF : Returns to the original mode.
2. DEMO : The screen before applying MagicColor appears on the right and
the screen after applying MagicColor appears on the left.
3. Full : Displays not only vivid natural color but also more realistic natural
skin color with clearness.
4. Intelligent : Displays vivid natural color with clearness.
MagicColor
Gamma correction changes the luminance of the colors with intermediate
luminance.
Gamma
Image Tab Definition
Adjusts the Fine , Coarse and Position values.
Fine : Removes noise such as horizontal stripes.
If the noise persists even after Fine tuning, repeat it after adjusting the
frequency (clock speed).
Coarse : Removes noise such as vertical stripes.
Image Setup
Coarse adjustment may move the screen image area.
You may relocate it to the center using the Horizontal Control menu.
Auto Setup : Auto adjustment allows the monitor to self-adjust to the
incoming video signal. The values of fine, coarse and position are adjusted
automatically.
Position
Adjusts the screen location horizontally and vertically.
Sharpness
Changes the clearance of image.
Option Tab Definition
You can configure MagicTune™ using the following options.
Loads the Preferences Dialog Box. Preferences in use will have an "V" in the
check box. To turn on or off any Preference, position the cursor over the box and
click.
Preferences
Enable task tray menu .
- To access the MagicTune™ menus, click the icon on the [task tray menu].
The menus are not displayed if the [Enable System Tray] is deselected in
Depending on the monitor models Color Control,
Sharpness, Contrast, Color Tone, Brightness will not be
adjustable in MagicColor mode of Full and Intelligent.
MagicColor mode will be different according to monitor
models.
Gamma mode will be different according to monitor models. Some
monitor will only support Three modes( Mode1, Mode2, Mode3)
Advertisement
