Advertisement
Connecting the Monitor
1.
Connect a power line to a direct current power supply and then plug it into the relevant power
port.
Using the D-Sub (analog) connector on the video card.
2-1.
Connect the DVI terminal of your monitor to the D-Sub terminal of your computer using a
DVI/D-Sub cable.
Connected to a Macintosh.
2-2.
Connect the monitor to the Macintosh computer using the 'DVI to D-SUB' connection cable.
2-3.
In the case of an old model Macintosh, you need to connect the monitor using a special Mac
adapter.
Turn on your computer and monitor. If your monitor displays an image, installation is
3.
complete.
If you properly connect your monitor using the DVI connector but get a blank screen, check to
see if the monitor status is set to analog. At this time, press the Power button at the right of
your monitor or the Custom button at the left so that it checks the input signals again.
Advertisement
