Siemens DELTA i-system Operating And Installation Instructions page 59

Sun protection and twilight function
7. Programming the twilight function:
Prog Zufall Astro
Uhrzeit
Datum
Confirm the setting by a short depression of the
After shutting off the twilight function, programming is terminated. The timer displays the
actual time.
Prog Zufall Astro
Uhrzeit
Datum
This setting can be changed with the the
Approximate twilight function brightness values
The following table shows some brightness values corresponding to the indicated figure
indicated
00
10
30
50
70
90
98
Info: Program the twilight function in the evening with the brightness level at which the
blind/shutter is to be lowered. In this case, the two figures on the right must be set to the
same value as those on the left.
9. Confirm the setting by depressing the
and the timer displays the actual time.
Mo
Di
Mi
Do
Fr
Sa
So
Mo
Di
Mi
Do
Fr
Sa
So
approx. value in lux
6
17
50
80
135
220
300
Use the or
the twilight function
flashing:
continuously on twilight function activated
key.
Set
8. When the twilight function is activated, the two
figures on the left indicate the current
brightness.
The two figures on the right are flashing
and represent the preset brightness below
which the blind/shutter is lowered.
or key.
The desired brightness values of the sun
protection function must be determined
individually.
key briefly. Programming is now terminated
Set
key to activate and deactivate
twilight function deactivated
GB
59