Setting The Mode Of Operation; Automatic Operation With Program Memories; A B C - Siemens DELTA i-system Operating And Installation Instructions

Setting the mode of operation

5. Setting the mode of operation
The shutter control timer 'Komfort' can be set to the 'Automatic' and 'Manual' modes. It
has 3 program memories (
automatic mode.
Automatic operation:
The preset switching times of program memory
Manual operation with the
The displays shows
Manual operation:
The timer permits manual operation only with the
The preset switching times of program memory
, or are not displayed.
A B C

5.1 Automatic operation with program memories

Three individual programs with combinations of switching times can be stored in the
memories. Selecting one of the program memories
switching program.
Depressing the
Mode
) and manual operation.
C
Prog Zufall Astro
A A
Uhrzeit
Datum
W
Prog Zufall Astro
B
Uhrzeit
Datum W
Prog Zufall Astro
C
Uhrzeit
Datum W
Prog Zufall Astro
Uhrzeit
Datum W
, , and
A B
or
, or .
A B C
key permits choosing between the program memories (
Example:
Depress the
Mo
Di
The display indicates
Mi
Do
programmed in this memory will be executed.
Fr
Sa
So
Depress the
Mo
Di
Mi
Only the switching times programmed in program memory
Do
Fr
will be executed.
B
Sa
So
Depressing
Mo
Di
. Only the switching times programmed in program
Mi
C
Do
Fr memory
Sa
So
If the key
Mo
Di
gram memories is selected and the blind/shutter control
Mi
Do
is set to manual operation. Programmed switching times
Fr
Sa
and the sun / twilight functions will then not be executed.
So
) that can be alternately selected in the
C
, or
A B
keys is also possible.
and
, and
A B
,
A
key once; memory
Mode
. Only the switching times
A
key once more; memory
Mode
once again selects program memory
Mode
will be executed.
C
is pressed again, none of the three pro-
Mode
will be executed.
C
keys.
will not be executed.
C
, ,
A B C
or activates the desired
B C
is selected.
A
B
GB
, or
A B
is selected.
43