Manual Operation - Siemens DELTA i-system Operating And Installation Instructions

Manual operation

GB
5.2 Manual operation
Manual operation is possible in any control mode.
The blind/shutter is raised with key and lowered with key .
For operation, the device distinguishes between a short and a long depression of the keys:
Short depression (less than 1 second):
A short depression generates a pulse corresponding to the duration of the key depression.
This function adjusts the position of the blind/shutter slats.
Long depression (longer than 1 second):
The blind/shutter control is activated permanently ('continuous run'). If no other motor
operating times are programmed, the running time is approximately 2 minutes.
44