Factory Settings - Siemens DELTA i-system Operating And Installation Instructions

Factory Settings

4.2 Factory settings
Program memories
with user data. In this case, switching times that are not used must be deleted (see 6.3).
Factory settings:
Memory :
A
Switching time 1:
Switching time 2:
Switching time 3:
Switching time 4:
Memory :
B
Switching time 1:
Switching time 2:
Switching time 3:
Switching time 4:
Memory :
C
Not used for factory settings
The three program memories
(e.g. for workdays, weekends, holidays, etc.).
All three program memories together can hold a maximum of 18 switching times.
The factory settings can be restored at any time by a reset.
and are occupied by factory-set values, but can be overwritten
A B
07:00, Mo-Fr (mon-fri), Astro function active
09:00, Sa-So (sat-sun), Astro function active
20:00, Mo-Fr (mon-fri), Astro function active
21:00, Sa-So (sat-sun), Astro function active
07:00, Mo-Fr (mon-fri), Astro function inactive
09:00, Sa-So (sat-sun), Astro function inactive
20:00, Mo-Fr (mon-fri), Astro function inactive
21:00, Sa-So (sat-sun), Astro function inactive
, and
A B
can be used to store independent programs
C
GB
39