Deleting Programmed Switching Times - Siemens DELTA i-system Operating And Installation Instructions

Deleting programmed switching times

Darkness
4
5
6
7
8
9
10
Daylight
• •
•
15
16
17
18
19
20
21
Darkness
5 10 15 20 25 30 35 40 45 50
Calendarweek
6.3 Deleting programmed switching times
1. Change into the programming mode
Depress the key until prog appears on the display.
Set
Setting the current data
Programming memory A
Programming memory B
Programming memory C
3. Select the switching times
Use the or
4. Delete the switching time
Depress the
Mode
The display shows "——:——"; the switching time is deleted.
Time
Setting the sun / twilight value
Shifting astro times
Learning louver running time
key to select the switching time to be deleted.
key for at least 3 seconds.
Example 2: (see figure)
The blind/shutter is to go up from Monday to
Friday when it gets light, however not before
06:30.
Programming:
Switching time: UP, 06:30, Mo - Fr, Astro
activated
Example 3: (see figure)
The blind/shutter is to go down from Monday
to Friday when it gets dark, at the latest,
however, at 19:10.
Programming:
Switching time: DOWN, 19:10, Mo - Fr, Astro
activated
2. Select the program memory
Use the or
memory , or
A B
are to be deleted.
Confirm your choice by depressing
key to select program
where switching times
C
Set
GB
briefly.
49