Setting Individual Motor Operating Times - Siemens DELTA i-system Operating And Installation Instructions

Setting individual motor operating times

7. Setting the minutes
Prog Zufall Astro
Uhrzeit
Datum
The new Astro times are now stored in memory.
6.5 Setting individual motor operating times
The motor operating time is factory-adjusted to ca. 2 minutes. It can be reduced (only
DOWN movement) or extended to a maximum of 12 minutes (UP and DOWN movements).
Time
Setting the current data
Programming memory A
Programming memory B
Programming memory C
3. Confirm by depressing
The relay for the upward movement closes and the blind/shutter is now raised
automatically with an operating time of 2 minutes.
The motor can be stopped before the preset operating time has ended by depressing
the or
4. Depress the key
A counter flashing at one second intervals shows the actual operating time.
5. When the blind/shutter has reached the desired position, stop the movement by
depressing the
Mo
Di
Mi
Do
Fr
Sa
So
Setting the sun / twilight value
Shifting astro times
Learning louver running time
briefly.
Set
key after the blind/shutter has reached the limit stop.
to start the programming phase. The blind/shutter moves down.
or the key.
Use key or
Confirm by depressing
1. Depress the
Set
2. Use the or
time program symbol
to set the minutes (00 – 59).
briefly.
Set
key until prog is displayed.
key to select the operating
.
GB
53