Labels
For use in Restraint or
Work Positioning
applications ONLY.
Non-Shock Absorbing
Lanyard:
Compliant with all
applicable
Z359.3-17, ANSI
A10.32-12, OSHA 1910,
and OSHA 1926 Subpart
M requirements.
Capacity:
Competent Person to
130-310lbs max.
least every 6 months.
(including all
equipment)
Material:
Polyester
indefinite, as long as
DO NOT
REMOVE LABELS
inspection requirements.
90396 (Rev. F)-1
7
Distributed by Engineered Fall Protection | Sales@EngineeredFallProtection.com | (314) 492-4422 | www.EngineeredFallProtection.com
WARNING!
Follow manufacturer's
instructions provided
with this lanyard at
time of shipment
from manufacturer.
Fully read and
understand
these instructions
before using.
User must inspect
before each use.
Improper use of this
inspect and initial at
product could result
in serious injury or
death. Avoid contact
Date of First Use
with sharp edges and
abrasive surfaces that
_____________
can cut or damage
the webbing or
Product lifetime is
components.
product passes all
90396 (Rev. F)-2
90396 (Rev. F)-3
Make only safe
and compatible
connections.
For use only with
other OSHA and ANSI
compliant equipment
as part of a personal
fall arrest system.
Remove this lanyard
from service if a fall
has been incurred.
90396 (Rev. F)-4
85134 (Rev. H)
Need help?
Do you have a question about the Non-Shock Lanyard and is the answer not in the manual?