Components And Specifications - Guardian Non-Shock Lanyard Instruction Manual

Compatibility: When making connections with Non-Shock Lanyard, eliminate all possibility of roll-out. Roll-out
occurs when interference between a hook and the attachment point causes the hook gate to unintentionally
open and release. All connections must be selected and deemed compatible with Non-Shock Lanyard by a
Competent Person. All connector gates must be self-closing and self-locking, and withstand minimum loads of
3,600 lbs. See the following for examples of compatible/incompatible connections:
Connector
closed and
locked to
D-ring. OK.
Two connectors
to same
NO.
D-ring.
Incompatible
or irregular
application,
which may
increase risk
of roll-out. NO.
Two or more
snap hooks or
carabiners
connected to
each other. NO.

Components and Specifications

Materials:
Webbing: Polyester and nylon. 1" width.
Snap Hooks/Rebar Hooks: galvanized steel or aluminum.
Part # Size
01120 18"
01121 18"
01122 18"
2'
01250
01251 3'
01255 3'
4'
01260
01261 4'
01265 6'
01266 6'
01270 4' - 6'
01271 4' - 6'
01280 4' - 6'
3
Description
Extension Lanyard w/Snap Hook End - Double Leg
Extension Lanyard w/Snap Hook End
Extension Lanyard w/Web Loop End
Non-Shock Absorbing Lanyard - Single Leg
Non-Shock Absorbing Lanyard - Single Leg w/Rebar Hook
Non-Shock Absorbing Lanyard - Single Leg
Non-Shock Absorbing Lanyard - Single Leg
Non-Shock Absorbing Lanyard - Single Leg w/Rebar Hook
Non-Shock Absorbing Lanyard - Single Leg
Non-Shock Absorbing Lanyard - Single Leg w/Rebar Hook
Non-Shock Absorbing Lanyard - Double Leg
Non-Shock Absorbing Lanyard - Double Leg w/Rebar Hooks
Adjustable Non-Shock Absorbing Lanyard
Connector
to integral
lanyard.
NO.
Connector
directly to
webbing.
NO.
Connector
directly to
horizontal
lifeline. NO.