Labels - Guardian Truss Boss Anchor Instruction Manual

Training of Authorized Persons to correctly erect, disassemble, inspect, maintain, store, and use equipment
must be provided by a Competent Person. Training must include the ability to recognize fall hazards, minimize
the likelihood of fall hazards, and the correct use of personal fall arrest systems.
NEVER use fall protection equipment of any kind to hang, lift, support, or hoist tools or equipment, unless
explicitly certified for such use.
Equipment subjected to forces of fall arrest must immediately be removed from use.
Age, fitness, and health conditions can seriously affect the worker should a fall occur. Consult a doctor if there
is any reason to doubt a user's ability to withstand and safely absorb fall arrest forces or perform set-up of
equipment. Pregnant women and minors must not use this equipment.
Physical harm may still occur even if fall safety equipment functions correctly. Sustained post-fall suspension
may result in serious injury or death. Use trauma relief straps to reduce the effects of suspension trauma.

Labels

1-800-466-6385
www.guardianfall.com
Truss Boss Anchor
Part #: 00432
Prior to use, read
and understand all
manufacturer's
instructions
provided with
equipment at
time of shipment.
Compliant with OSHA
1910, OSHA 1926
Subpart M, ANSI
Z359.1-2007, and
ANSI A10.32-2012
regulations.
Date of Manufacture:
Materials:
Zinc-plated steel.
Capacity Range:
130-420 lbs. (including
all equipment).
All PFAS equipment
must be selected and
deemed compatible
with Truss Boss Anchor
by Competent Person.
Only make compatible
connections. Refer to
instructions for proper
connection methods.
! WARNING
MAXIMUM 1
connection per anchor.
Avoid contact with
hazards, including, but
not limited to, heat,
chemicals, electricity,
and sharp or abrasive
edges and surfaces.
90077 (Rev. C)
7
INSPECTION
GRID
User must inspect prior
to EACH use. Competent
Person must complete
formal inspection
every 6 months.
Competent Person to
inspect and initial.
Date of First Use:
________________
Product lifetime is
indefinite as long as
equipment passes pre-use
and Competent Person
inspections.
J
F
M
A
M
J
J
A
S
O
N
D
If equipment
fails inspection,
IMMEDIATELY REMOVE
FROM SERVICE
DO NOT
REMOVE LABELS
85095 (Rev. H)