Table of Contents
Advertisement
Connecting Cables
Connect the power cord to the DC power supply and to the 220V or 110V wall outlet.
(The voltage is automatically selected by the power supply.)
To use the D-Sub (analog) output through another device (monitor, TV, projector, etc.)
- Connect the RGB OUT port of the monitor and the D-Sub port of another device using the D-Sub
cable.
[RGB OUT]
When the graphics card supports D-Sub (analog) output
- Connect the RGB IN + USB port of the monitor and the D-Sub port and USB port of the computer
using the Tableau Signal Cable.
If the USB port of the computer is not connected, even though the picture is displayed on the screen,
the position of the electronic pen is not recognized.
[RGB IN + USB]
Advertisement
Table of Contents
