Table of Contents
Advertisement
Connections
Connecting Cables
Plug the power cord for the monitor into a nearby outlet.
•
Connect the signal cable to the 15-pin, D-sub port on the back of your monitor.
•
Connect the monitor to the Macintosh computer using the D-sub connection cable.
If the monitor and the computer are connected, you can turn them on and use them.
Downloaded from ManualMonitor.com Manuals
Connect the power cord for your monitor to the power port on the back of the monitor.
Use a connection appropriate for your computer.
Using the D-sub (Analog) connector on the video card.
[RGB IN]
Connected to a Macintosh.
Note
13
Advertisement
Table of Contents
