Rear Differential Lock System - Toyota LAND CRUISER LC200 Owner's Manual

Rear differential lock system

Use the rear differential lock system only when wheel spinning
occurs in a ditch or on a slippery or ragged surface. This system
is effective in case one of the rear wheels is spinning.
Rear differential lock switch
Lock
1
Push and turn the switch clockwise
until it clicks. The rear differential
lock indicator light will flash. Wait a
few seconds for the system to
complete operation. After the dif-
ferential is locked, the light will
come on.
Unlock
2
Turn the switch fully counterclock-
wise. When the differential lock is
disengaged, the indicator light will
turn off.
■ Operating tips
First turn the four-wheel drive control switch to "L4" with the center differential
locked to see if you can move forward. If this does not work, use the rear dif-
ferential lock system also.
Be sure to stop the wheels before locking the differential.
Unlock the differential as soon as the vehicle moves out.
LC200_OM_OM60R59W_(WE)
4-5. Using the driving support systems

473
4

: If equipped