Table of Contents
Advertisement
Available languages
Available languages
Page EN-28
Installation, substructure, connection and initial use
Installation, substructure, connection and initial use
Choosing a suitable location
CAUTION!
Risk of injury!
Improper handling of the appliance
may lead to injuries.
The appliance is heavy and bulky.
■
Have a second person help you to
transport and assemble the appli-
ance.
If a trolley is used to move the appli-
■
ance, the appliance must be moved
as shown on the packaging.
Only lift the appliance as shown on
■
the packaging.
Remove all obstacles on the transport
■
route and from the installation loca-
tion, e.g. open doors and clear away
objects lying on the fl oor.
The planned location must fulfil the following
prerequisites:
– Note that the location must be appropriate
for a total weight of 46kg.
– Ensure that the location is a dry, frost-free
space with a solid substructure.
Positioning
If you wish to install the dishwasher under-
neath a worktop, skip this section and contin-
ue with "Connecting the outlet hose".
1. Remove cardboard, polystyrene and ad-
hesive strips from the inside of the dish-
washer, if you have not already done so.
2. Place the dishwasher in the desired
position.
3. In order to equalise unevenness in the
floor and set up the dishwasher on a level
horizontal base, you can screw the four
appliance feet (26) in or out. There are
slots in the appliance feet around the cir-
cumference. Insert a screwdriver and turn
the appliance foot.
Use a spirit level to set up the dishwasher.
Connecting the outlet hose
NOTICE
Potential malfunction!
Waste water must be able to run away
freely at all times.
Ensure that the waste pipe has a di-
■
ameter of 40 mm.
Ensure that there are no kinks or dam-
■
age to the outlet hose.
Make sure that the end of the hose is
■
not submerged in the pumped water.
Do not extend the outlet hose or re-
■
place with another drainage pipe.
(26)
Hide quick links:
Advertisement
Chapters
Table of Contents
