Samsung DVD-R120 Instruction Manual page 117

4 Select the sub menu(Digital Output, DTS or
Dynamic Compression) using the ...†
buttons, then press the ENTER or √ button.
Select the item that matches the audio connection
you selected on pages 18~19(Method 1, 2 and 3).
No Disc
Timer Rec.
Digital Output
DTS
Setup
Dynamic Compression : On
MOVE SELECT
Digital Output
PCM : Converts to PCM(2CH) 48kHz audio.
Select PCM if your amplifier system is stereo and/or
Dolby Prologic.
Bitstream : Outputs bitstream (original format) such
as Dolby or DTS.
Select bitstream if your amplifier system has multi
channel digital audio surround decoding (Dolby
Digital and/or DTS).
No Disc
Timer Rec.
Digital Output
Setup DTS
Dynamic Compression : On
MOVE SELECT
DTS
Off : Doesn't output DTS bitstream (original format).
On : Outputs DTS bitstream. (via Digital output)
Select DTS when connecting to a digital amp with
DTS decoder.
When DTS soundtrack is played, sound is not output
from Analog Audio Output.
No Disc
Timer Rec.
Digital Output
DTS
Setup
Dynamic Compression : Off
MOVE SELECT
28
- English
Audio
: PCM
√ √
: Off
√ √
√ √
RETURN EXIT
Audio
: PCM
√ √
PCM
: Off Bitstream
√ √
√ √
RETURN EXIT
Audio
: PCM
√ √
: Off
Off √ √
On
√ √
RETURN EXIT
Dynamic Compression
This is only active when a Dolby Digital signal is detected.
On : When Movie soundtracks are played at low volume or
from smaller speakers, the system can apply appropriate
compression to make low-level content more intelligible and
prevent dramatic passages from getting too loud.
Off : You can enjoy the movie with standard Dynamic
Range.
No Disc
Timer Rec.
Digital Output
Setup DTS
Dynamic Compression : Off
MOVE SELECT
Use the ...† buttons to select the desired
5
item(PCM, Bitstream, DTS-Off, DTS-On,
Dynamic Compression-Off or Dynamic
Compression-On).
Then press the ENTER or √ button.
Press the RETURN or œ button to return
to the previous menu.
NOTE
Press the MENU button to exit the menu.
Audio
: PCM
√ √
: Off
√ √
Off
√ √
On
RETURN EXIT