7.3.
Service Mode
Information necessary for service can be displayed.
Service mode setting:
1. Turn the power off.
2. Press the [5] [9] and [R] button simultaneously for five seconds, then [70 FRET] is displayed on FL.
3. Press the [
] or [
4. Press the [OK] button.
5. It is displayed on FL as [SERV].: it is shown to have entered the service mode.
6. The command is transmitted by attached remote control
Method of making clear service mode: Press the power button (power off).
The display of information to each command is as follows.
NOTE:
Do not use it excluding the designated command.
] button to select until [80 SRV] is displayed on FL.
40