10.3. Disassembly of Top Cabinet
Step 1 Remove 3 screws.
Step 2 Remove Top Cabinet Ornament.
Caution: During assembling, ensure that the catches of
Top Cabinet Ornament are fully slotted to the holes on Top
Cabinet.
Step 3 Remove 2 screws.
Step 4 Slightly pull both side of Top Cabinet as diagram show.
Step 5 Lift up back of Top Cabinet about 30°.
Step 6 Press location A in downward direction at Front Panel.
Step 7 Remove the Top Cabinet.
Caution: Replace the SMPS P.C.B. Top Insulator if broken.
Ensure it is pasted properly on Top Cabinet as diagram
shown.
55