Table of Contents
Advertisement
6. Press <Enter> after you have typed your password. The computer prompts you to
reenter your password for verification.
7. Type your password again and press <Enter>. A message appears telling you that
the changes have been saved.
8. Press <Enter> again to return to the Security menu.
9. Press <Esc> to go to the Exit menu.
10. Press <Enter> or <F10> to exit and save your changes.
11. Press <Enter> again to restart the computer.
To enable the prompt, select the option Enabled in the Password on boot field
in System Setup.
If password use is not desired:
Follow the creating a password procedure above except leave the password field empty in
step 5.
44 Users Manual
Advertisement
Table of Contents
