| O Pe R At I N G In St R Uct Io Ns; Daily Checks; Manoeuvring The Platform - POP UP PUSH 6 ECO Operator's Safety And Maintenance Handbook

S E CTION F OU R

| O PE R AT I N G IN ST R UCT IO NS

DAILY CHECKS

Prior to operating the POP-UP PUSH 6 ECO, the following items must be checked:
STRUCTURE (E.G. DAMAGE, CRACKS, CORROSION,
ABRASION, WELDS, CONNECTIONS)
PLATFORM (FLOOR, RAILS, HANDRAIL SOCKETS)
CASTORS (SMOOTH MOVEMENT, DAMAGE)
BRAKES
OIL LEAKS
If the above checks reveal malfunctions or damage on the POP-UP PUSH 6 ECO, then the machine
must not be used until the problem is rectified.
If in doubt, seek further assistance from the manufacturer.
If safety decals are no longer legible or missing, please contact the manufacturer for replacements.
The Daily Checks page in Section 7 of this handbook may be photocopied to provide an aide memoir for
operators when undertaking these important checks.
WARNING: BEFORE OPERATING YOUR POP-UP PUSH 6 ECO, YOU MUST ENSURE THAT YOU HAVE BEEN
ADEQUATELY TRAINED IN ITS USE AND HAVE FULLY READ AND UNDERSTOOD THIS OPERATOR'S
HANDBOOK, PAYING PARTICULAR ATTENTION TO SECTION 3 - SAFETY RULES
POP-UP PUSH 6 ECO OPERATOR'S SAFETY AND MAINTENANCE HANDBOOK (v.0.4.0409)

MANOEUVRING THE PLATFORM

Manoeuvre the platform into position using both hands on the guard rails
at gate end. Take care to avoid trapping hands or feet whilst manoeuvring
the platform.
Never manoeuvre the POP-UP PUSH 6 ECO whilst it is elevated or with a
person, tools or materials in the platform.
BATTERY CONDITION
RAISE AND LOWER FUNCTIONS
EMERGENCY STOP AND LOWERING FUNCTIONS
SAFETY DECALS AND TRAINING CARD
Page 9 of 23