30
4.
Configuration
4.1
Standard programming in state of delivery
In delivery condition the reader has a standard programming that ensures the basic functioning of the
reader.
The
standard programming
-
Light ring pale blue in sleep mode.
-
Button background lighting low brightness in sleep mode, bright for 5 seconds on detecting a data
carrier.
-
RS-485 is set to MIFARE readers.
4.2
User parameterisation with the configuration tool usb
4.2.1
Usage of the Configuration tool
Depending on the application of the reader, it may be necessary to change the standard parameters.
With the software tool
no. 027966), it is possible to parameterise the reader and perform a firmware update.
You can find the IQ DeviceInstaller incl. Programming Instructions on our homepage in the download
area.
-
No higher-level system is needed for the programming.
-
The programming can also be performed on readers with a Clock/Data interface. The readers
are able to receive data via these normally unidirectional interfaces.
During the programming the readers are switched to the RS-485 mode.
Functional principle:
blue
Clock/Data
yellow
white
black
green
brown
pink
RS-485
blue
yellow
white
black
Mounting and Connection Instructions Reader series "luminAXS"
includes the following parameters:
"IQ DeviceInstaller"
Configuration tool USB
red
1
2
3
4
5
6
7
8
red
1
2
3
4
5
in combination with the
027966
RS-485
Interface converter
configuration tool usb
+12V DC
0 V
USB
PC/Laptop
(Item