Performance Features; Interfaces; System Conditions - Honeywell luminAXS Series Mounting And Connection Instructions

26
1.2

Performance features

- Clear and logical operating concept.
- Simple start-up.
- Simple RS-485 address allocation, manual or automatic.
- Automatic adjustment of transmission range.
- By use of MIFARE DESFire EV1/EV2 readers extreme safety is available (see 2.2).
- Synchronization of max. 3 readers installed close to one another.
- Lighting ring. Colour, brightness and function programmable.
- The reader is completely protected against humidity.
- For use outdoors and indoors (-25 °C to +65 °C)
- Simple assembly, surfaces of metal is possible.
- The reader can be directly mounted on commercially available f.m. sockets (DIN).
Special keypad features:
- Neutral labelling of LEDs and keypad.
- Abrasion-resistant 10 key keypad with 6 additional functional keys.
- Ta ctile and acoustical acknowledgement
- Night design with time-limited luminous background.
1.3

Interfaces

RS-485: Bidirectional interface with "Modulbus" protocol,
Interface range up to 2000 m
Clock/Data: Unidirectional interface, TTL-level, 4 bit code according to DIN 9785, active = LOW
Interface range up to 200 m
Only the same interfaces can be used in one system (RS-485 or Clock/Data).
1.4

System conditions

IDS
Device
IK3EU BUS-2 from V12.xx *)
IK3 EU conv.
Door contr. mod. BUS-2 from V12.xx *)
MB panels from V14.xx *)
MB-Secure from V05.xx *)
Software
WINFEM Advanced from V14.xx *)
IQ PanelControl from V05.xx *)
IQ SystemControl from V07.xx *)
*) only required for MIFARE DESFire EV1/EV2
Mounting and Connection Instructions Reader series "luminAXS"
For installation in accordance with VdS / EN / SES regulations
interface RS-485 must be used.
For installation in accordance with VdS / EN / SES regulations
interface RS-485 must be used.
.
.
ACS
Device
ACS-8
ACS-2 plus
ACT
Door controller RS-485
AXS4Secure
Foreign devices
Software
IQ MultiAccess
Interface
RS-485 Clock/Data
from V09.xx *) X
X
X
X
from V05.xx *)
from V12.xx *)