Interfacing To The Printer - Brady 1024 User Manual

1.5

Interfacing to the Printer

The Printer can be connected to the host via a serial or parallel cable.
Figure 1-4 Interfacing
For most applications, the interface between the Printer and the Host will
be serial (RS-232C). An interface cable is needed to connect the Printer
to the host. Cable configurations for typical interfaces are shown below,
(contact your reseller for part numbers and ordering information).
Figure 1-5 Interface Cables
Other applications may require a parallel connection from the Printer to
the host. The Printer can be connected to the host with a standard parallel
printer cable.
6 Getting Started