Programming - Pro1 IAQ T855iSH Operation Manual

Programming

Set Time
(If using programming)
Follow the steps below to set the day of the week and current time:
1. Press the MENU button.
2. Press SET TIME.
3. Day of the week will be flashing. Use the
select the current day of the week.
4. Press NEXT.
5. The current hour is flashing. Use the
select the current hour. When using 12-hour time, make sure
the correct a.m. or p.m. choice is selected.
6. Press NEXT.
7. Minutes are now flashing. Use the
select current minutes.
8. Press DONE when completed.
Important:
You will see a TECH SETUP option after the MENU key is pressed.
This TECH SETUP key is for installer configuration and should NOT
be changed unless you consult your professional heating and air
conditioning technician.
10
or key to
or key to
or key to
To customize your 7 day 4 time period Program schedule, follow
these steps:
Monday:
1. Select HEAT or COOL with the SYSTEM key.
Note: You have to program heat and cool each separately.
2. Press the MENU button (If menu does not appear first, press
RUN SCHED).
3. Press SET SCHED. Note: Monday is displayed and the
WAKE/OCC1 icon is shown. You are now programming the
WAKE/OCC1 time period for that day.
4. Time is flashing. Use the
selection for that day's WAKE/OCC1 time period.
Note: If you want the fan to run continuously during this time
period, select ON with the FAN key. If you want to use IAQ
mode during this time period, select IAQ with the FAN key.
5. Press NEXT.
6. The setpoint temperature is flashing. Use the
to make your setpoint selection for that day's WAKE/OCC1
period.
7. Press NEXT.
8. Repeat steps 4 through 7 for that day's LEAVE/UNOCC1
time period, for that day's RETURN/OCC2 time period,
and for that day's SLEEP/UNOCC2 time period.
Repeat steps 4 through 8 for the remaining days of the week.
Programming
or key to make your time
or key
11