Monitor Screen Status Display - Sony HDC-P50 Operating Instructions Manual

8
To finish the adjustment, set the DISPLAY switch to
OFF to exit Menu mode. Monitor Screen Status
Display
Besides the video image, a monitor connected to the SDI
MONI connector (VF setting) can display text and messages
showing the camera settings and operation status, as well as
items such as a center marker or safety zone marker.
When the DISPLAY/MENU switch is set to
DISPLAY
Items set to ON using the menu or related switches will be
displayed on the upper and lower edges of the screen.
a
b
EX Z55
c
D.EX
d
FC OFFSET ADDED 100(FAR)
e
5600K
1B 0dB
f
g
a Zoom position
Indicates the approximate position of the zoom lens variator
between wide angle (0) and telephoto (999).
Display in millimeters can also be selected.
b Lens extender
"EX" is displayed when a lens extender is in use.
c Digital extender
"D.EX" is displayed when a digital extender is in use.
d Follow focus indicator
Displayed if an offset is superimposed when follow focus is
enabled.
e 5600K mode
Displayed when 5600K is set to ON.
f Filter
Displays the type of filter currently selected. The number (1, 2,
3, 4, 5) indicates the ND filter, and the letter (A, B, C, D)
indicates the CC filter selection.
g Gain value
Indicates the current gain setting (dB).
h Focus position
Shows the focus position of a zoom lens as a numeric value (0
to 999 (infinity)).
Display in meters and feet can also be selected.
Note
Displayed only when a serial communication lens is
connected.
16
h
F255
i
12.5V
DOOR No1
j
k
F5.6
1/125
l
m