Sony HDC-P50 Operating Instructions Manual page 39

MAINTENANCE
Page name Item
Page No.
<AUTO IRIS> AUTO IRIS
M05
WINDOW
OVERRIDE
IRIS LEVEL
APL RATIO
IRIS GAIN
IRIS CLOSE
<LENS1> F NO. DISP
M06
AF DISPLAY
ALAC
F DROP COMP
MAX GAIN
DROP POINT
ROUNDNESS
STORE LENS FILE
ARIA
GAIN LIMIT
Settings
ON, OFF
1, 2, 3, 4, 5, 6
–99 to 99, 0, ---
–99 to +99, 0
–99 to +99, 65
–99 to +99, 0
ON, OFF
CONTROL, RETURN
ON, OFF
AUTO, OFF
OFF, ON, (OFF)
0.0 to 24 dB
0 to 99, 50
0.0 to 12 dB
Execute using ENTER.
AUTO, OFF
0 to 12 dB, OFF
39
Description
Selects the auto iris windows:
The shaded parts indicate the area where light
detection occurs.
Sets to temporarily change the reference value for
brightness of the automatic iris level in the range of ±2
steps:
–99: Two steps to fully closed iris.
99: Two steps to fully opened iris.
---: OFF
The setting returns to "---" when the power is turned
off.
±2 steps
Selects the iris indication on the panel when AUTO
IRIS is off:
CONTROL: Displays the value from the camera.
RETURN: Displays the value returned from the lens.
(When AUTO IRIS is on, the value returned from the
lens is always displayed.)
With AUTO selected, the status is displayed at the
right.
(ACTIVE): Compensation is in progress.
(WAIT): Waiting for completion of lens initialization.
(STOP): Compensation is turned off for a non-
applicable lens.
Turns F drop compensation on/off.
During compensation, the compensation gain is
displayed on the right.
(OFF): For when a serial lens is not attached.
Maximum compensation value
Compensation start point
Roundness of the compensation curve.
Saves settings to a lens file.
With AUTO selected, the status is displayed at the
right.
(ACTIVE): Compensation is in progress.
(WAIT): Waiting for completion of lens initialization.
(STOP): Compensation is turned off for a non-
applicable lens.