Status Screen; Starting Menu Operations - Sony HDC-P50 Operating Instructions Manual

i Battery voltage
Displays the battery voltage.
j Focus position meter marker name
Displays the marker name of the focus position meter.
k Setting change / adjustment process message area
This area is only used when the MESSAGE item of the menu
is set to other than OFF.
l F value
Indicates the lens F (iris opening) value.
m Shutter/ECS
Displays the shutter/ECS status. Nothing is displayed if the
electronic shutter is set to OFF.

STATUS screen

When the DISPLAY/MENU switch is set to DISPLAY, the
following status screen is displayed while the MENU SEL
knob/ENTER button is pressed.
a
1080/29.97PsF
b
SDI OUT
SLOT 1/2-OUT: HD/1.5G
1920×1080/29.97PsF
SDR BT.709
SLOT 3/4-OUT: HD/1.5G
1920×1080/29.97PsF
SDR
c
SWITCH ASSIGN
LENS
EXT I/O
PIN 6
PIN 7
PIN 8
PIN 9
a System format indicator
Displays the current system format.
b SDI OUT format indicator
Displays the current signal format configured for the SDI OUT
connector.
c SWITCH ASSIGN indicator
Displays which assignments are configured by the current
assignable functions.
BT.709
VTR S/S: OFF
RET : OFF
PIN 4 : OFF
: OFF
: OFF
: OFF
: OFF
Menu Operations
The menu displayed on a monitor connected to the SDI MONI
connector enables various settings of the camera to be
configured.
The following controls are used to operate the menus.
Turn the MENU SEL knob/ENTER button on the rear panel to
select menu items or values, then press the knob to apply
(confirm) the selection.
Rear
MENU SEL knob/ENTER button
Turn to select
DISPLAY/MENU switch

Starting Menu Operations

To display a menu page
Set the DISPLAY/MENU switch from OFF to MENU.
The menu page that was last operated will be displayed.
(If it is the first time, the CONTENTS page of the USER menu
will be displayed.)
To display the TOP MENU screen
If you set the DISPLAY/MENU switch from OFF to MENU
while holding the MENU SEL knob/ENTER button pressed,
"TOP" is displayed at the upper right corner of the screen.
Selecting it displays the TOP MENU screen, which lists the
available menus, and you can select the menus on this
screen.
TOP MENU screen
<TOP MENU>
USER
USER MENU CUSTOMIZE
ALL
OPERATION
PAINT
MAINTENANCE
FILE
DIAGNOSIS
17
Press to apply