Viewfinder Screen Status Display - Sony HDC4800 Operating Instructions Manual

Viewfinder Screen Status
Display
Besides the video image, the viewfinder can display text and
messages showing the camera settings and operation status,
as well as items such as a center marker or safety zone
marker.
When the DISPLAY switch is set to DISPLAY
Items set to ON using the menu or related switches will be
displayed on the upper and lower edges of the screen.
a
b
EX Z55
c
TALK
d
FC OFFSET(FAR) ADDED 100
e
5600K
1A 0dB 1/125
f
g
a Zoom position
Indicates the approximate position of the zoom lens variator
between wide angle (0) and telephoto (99).
b Lens extender
"EX" is displayed when a lens extender is in use.
"X12" is displayed for a lens with X1.2 extender.
c TALK indicator
Displayed when the intercom microphone is set to ON.
d Follow focus indicator
Displayed if an offset is superimposed when follow focus is
enabled.
e 5600K mode
Displayed when 5600K is set to ON.
f Filter
Displays the type of filter currently selected. The number (1, 2,
3) indicates the ND filter, and the letter (A, B, C) is for the CC
filter selection.
g Gain value
Displays the video gain value (dB) set with the GAIN switch.
h Focus position
Shows the focus position of a zoom lens as a numeric value (0
to 255 (infinity)).
h
F255
i
12.5V
DOOR No1
j
k
RET1 F5.6
l
m
n
23
Note
Displayed only when a serial communication lens is
connected.
i Battery voltage
Displays the input voltage.
j Focus position meter marker name
Displays the marker name of the focus position meter.
k Setting change / adjustment process message area
This area is only used when the MESSAGE item of the menu
is set to other than OFF.
l F value
Indicates the lens F (iris opening) value.
m Return indicator
Displayed when a return picture is displayed. The numeral
indicates the displayed return picture channel.
n Shutter/ECS
Displays the shutter/ECS status. Nothing is displayed if the
electronic shutter is set to OFF.
When you press the CANCEL/STATUS switch
to STATUS
The status display is changed to show the following items.
a
b
1080-59.94i
ASSIGNABLE
!ND :2
!CC :C
!FAN :MAX
!EXT :ON
ssxxxxxxb
OPT CAMC
c
ssxxxxxxb
d
c
a Assignable switch indicator
The function assigned to the assignable switch (page 6) is
indicated.
For the functions that can be assigned, see OPERATION
menu "<SWITCH ASSIGN1> 14 (U09)" (page 39).
b Format indicator
The current video format is displayed.
c '!' display area
This area is used to display abnormal statuses, using the <'!'
IND> function. Display options can be set, using the menu.
For details, see "<'!' IND> 02 (U05)" (page 34) in the
OPERATION menu.
d Light sensor level indicators
This area shows the light sensor levels in segments.
:OFF
ssxxxxxxb
BPU CCU
ssxxxxxxb